EasyManua.ls Logo

Victory STAR User Manual

Victory STAR
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
NOTICE: For residential use only.
Installer: Leave this guide with the homeowner.
Homeowner: Keep this guide for future reference.
Professional Built-In Range Hood
Model Name:
Available Sizes:
STAR
36”, 42”, 48”
Rev. 3062u.3a
INSTALLATION GUIDE
AND USERS MANUAL
Question and Answer IconNeed help?

Do you have a question about the Victory STAR and is the answer not in the manual?

Victory STAR Specifications

General IconGeneral
Width60 cm
Number of Motors1
Control TypeMechanical
MaterialStainless steel
Filter TypeAluminum

Summary

Important Safety Notice

Fire, Electric Shock & Grease Fire Prevention

Use for ventilation only, vent outside, use metal ducts, ground unit, keep clean, never leave unattended.

Important Safety Notice (Continued)

Stove Top Grease Fire Response

Smother flames, turn off burner, do not use water, use appropriate extinguisher.

Gas Leak Safety Precautions

Extinguish flames, do not turn on fan/lights, open doors/windows, call emergency services.

Electrical Requirements

Codes, Grounding and Supply

Observe codes, contact electrician, ensure proper grounding, use 120V/60Hz supply.

Wiring, Connection and Safety

Use copper wire, connect to fused disconnect, use U.L./C.S.A. conduit connector, avoid shock.

Venting Requirements

Duct System Specifications

Terminate outside, use metal/aluminum duct only, keep clean, 8" duct minimum required.

Calculating Duct System Length

Specifications

Dimensions (Continued)

Safety Warnings

Warns about sharp edges, excessive weight, and need for gloves/multiple people.

Preparation (Continued)

Installation Options

Pre-Install

Pre-Install (Continued)

Installation

Installation (Continued)

Option 1: Open Cupboard Ducting System

Installing an 8" round elbow duct and connecting to the exhaust using aluminum tape.

Option 2: Closed Box Installation Steps

Install duct system, electrical outlet, flex-duct, and plug in the range hood.

Electrical Safety and Testing

Ensure proper grounding, test fan motor and lights for functionality.

Venting Methods

Roof or Wall Venting Procedures

Factory set for roof/wall venting; 90° elbow for wall vent, use metal/aluminum duct.

Important Venting Rules and Damper

Never vent into enclosed spaces, seal joints, use backdraft damper, insulate in cold climates.

Venting Methods (Continued)

Venting Configurations and Options

Illustrates wall vent, optional remote blower, roof vent, and roof vent with remote blower.

Wiring Diagram

Electrical Component Connections

Shows connections for motor, lights, blowers, and capacitors for the range hood.

Range Hood Operations

Troubleshooting

Unit Not Operating or Vibrating

Check power, wiring, fuses; ensure proper mounting and duct size.

Weak Blower or Improper Venting

Check duct size, elbows, connections, sealing, and mounting height.

Use and Care Information

Maintenance

Stainless Steel Filter Care

Drain oil, clean filters every 30 hours, dishwasher safe, use degreaser if needed.

Bulb Replacement

Related product manuals