Last update: 2018-08-21 10:10 ccgx:start https://www.victronenergy.com/live/ccgx:start
https://www.victronenergy.com/live/ Printed on 2018-08-21 11:59
1.2 Snap-on ferrite beads for class B EMI compliance
In order to reduce Electromagnetic emissions in compliance with class B EMI you should place the
provided snap-on ferrite beads around every connection cable as close as possible to the Color
Control.
HQ1700 and later
For serial numbers HQ1700 and later, mount a single snap-on ferrite bead (supplied with the unit)
To Next Page
Loading...
