To Next PageTo Next PageWhat to do if the lock on my Videx 3011 doesn't work?
If the lock on your Videx Intercom System isn't working, begin by checking the 13Vac output on the transformer. Next, inspect the wires of the electric lock. Finally, ensure the wire size conforms to the recommended specifications.
How to troubleshoot a dead Videx 3011 Intercom System?
If your Videx Intercom System is dead, start by checking the mains input to the transformer. Then, verify the 12Vdc output from the power supply at the +12 terminal. Also, check the fuses and inspect the power supply wires for any shorts.
How to fix feedback (Larsen effect) on Videx 3011?
To address feedback issues (Larsen effect) in your Videx Intercom System, first, ensure the handset microphone is firmly fitted inside its housing. Next, check that the speaker unit microphone is also securely fitted and that nothing is blocking the microphone hole. You may also need to adjust the volume using the trimmer controls on the rear of the speaker unit.
Why is there a hum on the speech lines of my Videx 3011 Intercom System?
To resolve hum on the speech lines of your Videx Intercom System, verify that the system cables are not running close to any high voltage or mains cables. Also, ensure the system is wired exactly as shown on the wiring diagram.
What causes no speech from the handset on a Videx 3011 Intercom System?
If there is no speech from the handset of your Videx Intercom System, check and/or adjust the volume operating on trimmer controls on rear of speaker unit. Also, check the wire from terminal 1 of the speaker unit to terminal 1 of the handset.
Why is there no speech from the door panel of my Videx 3011?
If there is no speech coming from the door panel on your Videx Intercom System, check and/or adjust the volume operating on trimmers controls on rear of speaker unit. Also, check the wire from terminal 2 of the speaker unit to terminal 2 of the handset.
What to do if Videx 3011 Intercom System has speech and lock, but no call tone?
If the speech and lock functions work on your Videx Intercom System, but there's no electronic call tone, check the link between the C and C1 terminals of the speaker unit. Also, check the call wire to terminal 4 of the handset for breaks or short circuits.
General| Brand | Videx |
|---|---|
| Model | 3011 |
| Category | Intercom System |
| Language | English |
Check for issues like no mains input, incorrect 12Vdc output, blown fuses, or shorted wires.
Verify the link between C and C1 terminals and check the call wire for breaks or short circuits.
Adjust speaker unit volume trimmers and check wiring between speaker and handset.
Adjust speaker unit volume trimmers and check wiring between speaker and handset.
Check handset links, transformer output, electric lock wiring, and cable conformity.
Ensure handset and speaker microphones are fitted correctly and adjust speaker unit volume.
Verify system cables are routed away from mains cables and wiring matches the diagram.
