Need help?Do you have a question about the Vidikron VERSION 50 and is the answer not in the manual?
Details the projector's key features, including resolution, contrast, and input options.
Identifies and describes components visible on the projector's front and top surfaces.
Identifies and describes components on the projector's rear and bottom surfaces.
Explains the projector's physical control buttons, LEDs, and IR sensors.
Details the various input and output ports available on the projector.
Describes the functionality of the projector's onboard keypad for operation.
Covers the operation and functionality of the projector's remote control.
Compares the functions available on the projector's control panel and remote.
Provides instructions for installing batteries and using the remote control effectively.
Discusses projector mounting types, screen considerations, and placement factors.
Explains how to calculate the optimal projector-to-screen distance for image size.
Guides on aligning the projector image vertically and horizontally for proper display.
Details various methods for mounting the projector, including ceiling and table options.
Illustrates how to connect various video sources to the projector.
Explains connections for HDTV (Component/RGB) and computer signals.
Provides instructions for connecting sources via the HDMI interface.
Guides the user on how to connect the projector to an AC power source.
Step-by-step instructions for powering the projector on and initial startup.
How to adjust image size, focus, and vertical lens position.
Details how to adjust the projector's physical height and projection angle.
Recalls previously saved picture settings for different viewing conditions.
Adjusts the image's aspect ratio to match the video signal format.
Navigates and interacts with the projector's on-screen display menus.
Chooses the active video or data input signal for display.
Enables and configures Picture-in-Picture and Picture-by-Picture display modes.
Procedure for safely powering down the projector and its cooling cycle.
Guide to accessing and navigating the projector's on-screen display menus.
Overview of the primary categories within the OSD menu system.
Detailed settings for optimizing brightness, contrast, color, tint, and sharpness.
Adjusts color temperature presets and selects appropriate color spaces.
Configures input selection, aspect ratios, and image enhancement features.
Improves standard-definition images and controls sharpness behavior.
Fine-tunes high-resolution signals and enables color calibration features.
Manages saving and recalling custom picture quality configurations.
Displays system status including sleep timer, lamp power, and hours.
Configures OSD language, keystone correction, and display position.
Configures Picture-in-Picture and Picture-by-Picture display modes.
Details accessing advanced projector adjustments and controls via the Service menu.
Adjusts color balance and gamma settings for optimal image performance.
Customizes color characteristics for NTSC, HDTV, and PAL signals.
Manages video signal over scan and adjusts black level settings.
Adjusts iris for contrast and centers the image on the screen.
Manages cooling fan operation and resets the projector lamp timer.
Configures RS-232 communication and manages remote control IR codes.
Applies ISF standards for professional picture quality calibration.
Controls startup logo display duration and enables the ISF logo.
Guides physical connection and configuration of RS-232 communication.
Lists commands for controlling projector functions via RS-232 interface.
To Next Page
General