Viessmann B2HAH13 - Settings the Room Temperature; Setting the Heating Program for Central Heating

17
5461 885 - 04
Vitodens 200-W B2HA/B2HB, 222-F B2TA/B2TB Operating
Heating
Setting the Room Temperature
Setting the room temperature for standard heating mode
Factory setting: 68°F (20°C).
For the heating circuit displayed in the header
Proceed as described on page 11.
For the other heating circuits
Extended menu:
1.
2. “Heating”
3. Select the heating circuit if necessary (see page 16)
4. “Set room temperature”
5. Set the required value
Setting the room temperature for reduced heating mode
(night setback)
Factory setting: 65°F (18°C).
Extended menu:
1.
2. “Heating”
3. Select the heating circuit if necessary (see page 16)
4. “Set reduced room temp”
5. Set the required value
The rooms are heated to this temperature:
H Between the time phases for standard heating mode
(see page 18).
H In the holiday program (see page 21).
Factory setting: “Heating and DHW”
For the heating circuit displayed in the header
Proceed as described on page 11.
For the other heating circuits
Extended menu:
1.
2. “Heating”
3. Select the heating circuit if necessary (see page 16)
4. “Heating program”
5. “Heating and DHW”
H The rooms of the selected heating circuit are heated
in accordance with the room temperature and time
program settings.
H DHW is reheated in accordance with the set DHW
temperature and time program (see chapter “DHW
heating”).
Setting the Heating Program for Central Heating