33
5461 885 - 04
Vitodens 200-W B2HA/B2HB, 222-F B2TA/B2TB Operating
Emissions
Emissions Test Mode
Emissions test mode should only be activated by a
certified technician during the annual inspection.
Extended menu:
1.
2. “Test mode”
3. “Flue gas test ON”
If the burner is on, the symbol is shown.
Note: You can also enable emissions test mode if the
controls are locked out by your heating contractor.
Ending emissions test mode
H Automatically after 30 min.
H Press
OK
.
To Next Page
Loading...
