Vitodens 200-W B2HA/B2HB, 222-F B2TA/B2TB Operating
5461 885 - 04
28
Additional Adjustments
Entering Names for the Heating Circuits (continued)
The time and date are factory-set. If your heating system
has been shut down for a long time, it may be necessary
to set the time and date.
Extended menu:
1.
2. “Settings”
3. “Time/Date”
4. Set the time and date.
Note: The entered term is deleted with “Reset?”;
“Heating circuit 1” will then be shown again.
Example:
Name for “Heating circuit 2”: Apartment
The menu shows “Apartment” for “Heating circuit 2”
Setting the Time and Date
Setting the Language
At the commissioning stage, the display is in German.
1. “Sprache” (Language) Deutsch DE (German)
2. Select the required language with
3. Accept by pressing OK.
To change the language
Extended menu:
1.
2. “Settings”
3. “Language”
4. Select the required language with
5. Accept by pressing OK.
To Next Page
Loading...
