17
Rotational direction of the mixer motor
Checking the rotational direction of the mixer motor
After being switched on, the appliance implements a
self-test. During this, the mixer is opened and closed
again.
Observe the rotational direction of the mixer motor dur-
ing its self-test.
Then manually set the mixer to "OPEN".
Note
The flow temperature must now rise. If the temperature
drops, either the motor is turning in the wrong direction
or the mixer insert is incorrectly fitted.
Mixer installation instructions
Changing the rotational direction of the mixer motor (if required)
Fig. 19
1. Remove the top casing cover of the mixer exten-
sion kit.
Danger
An electric shock can be life threatening.
Switch OFF the power supply before open-
ing the appliance. For example, remove the
fuse or switch off a mains isolator.
2.
At plug
gS
, swap the cores at terminals " " and " ".
3. Refit the casing cover.
Installation sequence
Commissioning (cont.)
5838001
Installation
To Next Page
Loading...
Need help?
General
