Viessmann GC1 Operating Instructions For The System User

19
Note
When you call up the "Energy cockpit" for the first
time, you will be notified that the values shown cannot
be used for settling bills with the power supply utility.
■
The "Energy cockpit" is opened once you confirm
this notification with OK. This notification will not
appear again.
■
If you tap Cancel, the "Energy cockpit" will not be
opened. The notification will be shown again next
time.
Default display in the "Energy cockpit"
In the "Energy cockpit" you can call up the following
information on the energy state of the boiler:
/ Energy consumption (gas or oil) and operating
data: See following chapter "Energy consumption
and operating data"
Energy consumption and operating data
You can call up the following information about your
boiler:
■
"Current output" (heating output)
■
"Hours run" (operating time)
■
"Fuel"
■
"Fuel consumption" (energy consumption)
Tap the following on-screen buttons:
1. If required, for the home screen
2. / for the "Energy cockpit"
3. in conjunction with a gas boiler
or
in conjunction with an oil boiler
The operating data is shown, e.g. the "Hours run"
Note
To reset the hours run: See chapter "Calling up
information".
4. Energy consumption:
for "Fuel consumption"
5. Tap the required period:
"The past 7 days", including current day
"The past 5 weeks", including current week
"For the past 12 months", including current
month
"For the past 2 years", including current year
Consumption above or below these levels is shown
graphically within the selected time period for com-
parison purposes:
Dark areas: Proportion of energy consumption
for central heating
Light areas: Proportion of energy consumption
for DHW heating
6. Tap e.g. a day or a week on the graph. The energy
consumption for this period is shown as a numeri-
cal value in kilowatt hours "kWh". 10 kWh corre-
sponds to approximately one litre of fuel oil or one
cubic metre of gas.
Information on the energy consumption figures
shown
The calculation of the energy consumption takes into
account the installed system components and the user
behaviour (e.g. operating time and utilisation level).
Depending on system-specific conditions, differences
may arise between the displayed (calculated) and
actual consumption figures.
They therefore cannot be used as a binding basis for
billing with the power supply utility.
Control of a multi boiler system: Control unit operation
Information in the "Energy cockpit" (cont.)
5798582

Viessmann GC1 Specifications

General

Brand	Viessmann
Model	GC1
Category	Control Unit
Language	English