20
Energy consumption correction factor
You can enter a correction factor to adjust the dis-
played (calculated) values for energy consumption/fuel
consumption to the actual values (as measured by the
meter in your home). The calculated value is multiplied
by the correction factor. However, due to seasonal cli-
mate conditions and other factors, discrepancies may
still arise.
Tap the following on-screen buttons:
1. If required, for the home screen
2. / for the "Energy cockpit"
3. in conjunction with a gas boiler
or
in conjunction with an oil boiler
4. for "Fuel consumption"
5. "Input adjustment factor"
6. / for the required correction factor
7. to confirm
Control of a multi boiler system: Control unit operation
Information in the "Energy cockpit" (cont.)
5798582
To Next Page
Loading...
Need help?
General
