2.1 Product description
Vitocell 100-H, type CHA
130, 160 and 200 l capacity, horizontal, enamelled, internal indi-
rect coil
Horizontal DHW cylinder with internal indirect coil.
Cylinder and internal indirect coil made from steel, corrosion protec-
tion through Ceraprotect enamel coating and protective magnesium
anode.
The DHW cylinders feature all-round thermal insulation enclosed
within an epoxy-coated sheet steel casing in a Vitosilver finish.
Vitocell 300-H, type EHA
160, 200, 350 and 500 l capacity, horizontal, made from stainless
steel, internal indirect coil
Horizontal DHW cylinder made from stainless steel with internal indi-
rect coil.
The DHW cylinders feature all-round thermal insulation enclosed
within an epoxy-coated sheet steel casing in a Vitosilver finish.
Cylinder banks
Vitocell 300-H, 350 and 500 l capacity can be combined with on-site
manifolds for the heating water and DHW sides to form cylinder
banks (700 l, 1000 l, 1500 l).
The DHW cylinders are supplied as individual units for easy installa-
tion and handling.
Vitocell 100-V, types CVA, CVAA, CVAA-A
160, 200 and 300 l capacity, vertical, enamelled, internal indirect
coil
Vertical DHW cylinder with internal indirect coil.
Cylinder and internal indirect coil made from steel, corrosion protec-
tion through Ceraprotect enamel coating and protective magnesium
anode.
The DHW cylinders feature all-round thermal insulation enclosed
within an epoxy-coated sheet steel casing in a Vitosilver or white fin-
ish.
Vitocell 100-V, type CVAA-A, 160 and 200 l capacity:
■ Vacuum-insulated panel for minimum standby losses
500, 750 and 950 l capacity, vertical, enamelled, internal indirect
coil
Vertical DHW cylinder with internal indirect coil.
Cylinder and internal indirect coil made from steel, corrosion protec-
tion through Ceraprotect enamel coating and protective magnesium
anode.
The DHW cylinders feature all-round thermal insulation in Vitosilver.
The removable thermal insulation is supplied separately.
Cylinder banks
The Vitocell 100-V with 300 and 500 l capacity can be combined with
manifolds for the heating water and DHW to form cylinder banks.
Ready-to-fit manifolds are available as accessories.
The DHW cylinders are supplied as individual units for easy installa-
tion and handling.
Vitocell 100-V, type CVWA
300, 390 and 500 l capacity, vertical, enamelled, internal indirect
coil
Vertical DHW cylinder with large internal indirect coil, especially for
DHW heating in conjunction with heat pumps.
Cylinder and internal indirect coil made from steel, corrosion protec-
tion through Ceraprotect enamel coating and protective magnesium
anode.
The DHW cylinders feature all-round thermal insulation in Vitosilver.
The removable thermal insulation is supplied separately.
Vitocell 300-V, type EVIA-A, EVIA-A+
160, 200 and 300 l capacity, vertical, made from stainless steel,
internal indirect coil
Vertical DHW cylinder made from stainless steel with internal indirect
coil.
The DHW cylinders feature all-round thermal insulation enclosed
within an epoxy-coated sheet steel casing in a Vitosilver or white fin-
ish.
Vitocell 300-V, type EVIA-A, 160, 200 and 300 l capacity:
■ Vacuum-insulated panel in cylinder jacket for ErP energy efficiency
class A
Vitocell 300-V, type EVIA-A+, 160 and 200 l capacity:
■ Vacuum-insulated panel in cylinder jacket and cylinder cover for
ErP energy efficiency class A+
500 l capacity, vertical, made from stainless steel, internal indi-
rect coil
Vertical DHW cylinder made from stainless steel with internal indirect
coil.
The DHW cylinders feature all-round thermal insulation in Vitosilver.
The removable thermal insulation is supplied separately.
Cylinder banks
The Vitocell 300-V with 300 and 500 l capacity can be combined with
manifolds for the heating water and DHW sides to form cylinder
banks. Ready-to-fit manifolds are available as accessories.
The DHW cylinders are supplied as individual units for easy installa-
tion and handling.
Product information
DHW heating
VIESMANN
5
5414646
2
To Next Page
Loading...
