!
Please note
Parameter changes can result
in equipment damage.
Never change parameters that
have not been explained in
detail. The code may only be
used for changing parameters
that are explained in these
instructions (e.g. "H31"). The
warranty becomes void if pro-
tected parameters are changed
that are not explained in these
instructions.
Press the following keys:
1. D press until parameter
"PSS" is displayed.
2. CD simultaneously for less
than 2 s; the display
shows "– – –".
3. C press until value "177" is
displayed.
4. CD simultaneously and for at
least 5 s; the code entry
is saved and the next
higher menu level is dis-
played.
5. To return to the standard display
(return temperature), repeat step 4.
Selecting the set value for heating mode (HEA)
Press the following keys:
1. CD simultaneously and
briefly (< 2 s); the display
shows "SET".
2. CD simultaneously and
briefly; the display shows
"Coo".
3. D the display shows
"HEA".
4. CD simultaneously and
briefly; the display shows
the current set value.
5. C to raise the set value
or
6. D to lower the set value
7. CD simultaneously and for at
least 5 s; the change is
saved and the next
higher menu level is dis-
played.
8. To return to the standard display
(return temperature), repeat step 7
several times.
Standard setting 40 °C
Setting range 35 to 44 °C
To Next Page
Loading...
