5
The Vitoconnect 100 enables communication via the
internet between the connected Vitotronic control unit
and the Viessmann server.
The full range of functions is only available if the fol-
lowing conditions are met:
■
The Vitotronic control units and the Vitoconnect 100
must be connected and configured correctly.
■
The Vitoconnect 100 is connected to the internet via
a WLAN router.
■
Internet access must be available at all times.
■
The user has been registered (see page 14).
■
To ensure that messages can still be sent if there is a
power failure, we recommend connecting the
Vitoconnect 100 and WLAN router to the power sup-
ply via a UPS.
Note
■
The heating system and the functionality of the mes-
sage paths must be tested at regular intervals.
■
To further improve the operational reliability of the
heating system, we recommend implementing sup-
plementary measures, e.g. frost protection or moni-
toring for water damage.
Liability
Viessmann accepts no liability for loss of profit, unat-
tained savings, or other direct or indirect consequential
losses resulting from use of the Vitoconnect 100, the
Viessmann server or the software, or for damage
resulting from inappropriate use.
The Viessmann General Terms and Conditions apply,
which are included in each current Viessmann pricelist.
Viessmann accepts no liability for SMS via push notifi-
cation or email services, which are services provided
by network operators. The terms and conditions of the
relevant network operators apply in this context.
Safety and liability
Operational reliability
5785 665 GB
Information
To Next Page
Loading...
