Viessmann VITOGAS 100 User Manual (English)

Other manuals for Viessmann VITOGAS 100

Operating Instructions And User's Information Manual8 pages

Technical Data Manual16 pages

Questions and Answers:

H
hughesmichelleSep 8, 2025
What to do if Viessmann VITOGAS 100 Boiler will not start and high limit safety cut-out activated?
- A
  Arthur WaltonSep 8, 2025
  If your Viessmann Boiler is not starting and the high limit safety cut-out has activated, check the setting and the function of the thermostat. Wait approximately 17 minutes; if the boiler then starts automatically, check the flue pipe and the chimney. If the boiler does not start automatically, check the flue gas monitor. Fit strapping plug aNS or a flue gas monitoring sensor.
W
William OrtizSep 10, 2025
What to do if Viessmann Boiler has low ionization current?
- R
  robertowrightSep 10, 2025
  If your Viessmann Boiler won't start and you suspect a low ionisation current or a broken lead, start by checking the ionisation current, ensuring it meets the minimum value of 5 µA while the main burner is operating. Then, remove the pilot burner to inspect it for any signs of damage. Also, verify the polarity of the power supply cable.
A
Allen RussoSep 12, 2025
What to do if Viessmann VITOGAS 100 won't start and flue gas monitor has responded?
- I
  iduranSep 12, 2025
  If your Viessmann Boiler won't start because the flue gas monitor has responded (if installed), you should check the flue pipe and the chimney. If the boiler then starts automatically, check the flue pipe and the chimney. If the boiler does not start automatically, check the flue gas monitor.
P
Paul LopezSep 13, 2025
What to do if strapping plug aNS is missing in Viessmann VITOGAS 100 Boiler?
- C
  Christopher MossSep 13, 2025
  If your Viessmann Boiler won't start and strapping plug aNS is missing at the burner control unit, fit strapping plug aNS.