26
08. / for "WEEK TYPE"
09. OK to confirm
10. / for the required display
11. OK to confirm
Restoring factory settings
Restore the factory settings of your remote control,
for example if the remote control has already been
commissioned with a different Viessmann appliance.
All settings changed by you are restored to the deliv-
ered condition.
Note
Your contractor has to update the settings for the
remote control on the control unit of your Viessmann
appliance too, e.g. heat generator.
Press the following buttons:
1.
2. / for "RESET"
3. OK to confirm
4. / for "ON"
5. OK to confirm
6. Enter PIN "1917". To do this, select each number
individually:
■
/ for the required number
■
OK to confirm
7. OK to confirm the prompt
The remote control is reset to the factory settings.
The remote control is restarted. Initial commission-
ing of the remote control must be carried out again;
see page 15. The connected Viessmann appliance
also has to be restarted to re-establish the connec-
tion to the remote control. All other settings of the
Viessmann appliance are retained. The Viessmann
appliance remains functional.
Further settings
Setting the format of the day and time display (cont.)
6192459
Functions
To Next Page
Loading...
