EasyManua.ls Logo

Viessmann VITOTROL 100-E - DHW Heating; Setting the DHW Temperature; Time Program for DHW Heating

Viessmann VITOTROL 100-E
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
DHW is heated according to the set time program. If you switch off DHW heating, no water can be
heated.
Press the following buttons:
1.
2. / for "DHW"
3. OK to confirm
4. / for "DHW ONOFF"
5. OK to confirm
6. / for "ON"
7. OK to confirm
Switching off DHW heating
Press the following buttons:
1.
2. / for "DHW"
3. OK to confirm
4. / for "DHW ONOFF"
5. OK to confirm
6. / for "OFF"
7. OK to confirm
Setting the DHW temperature
Press the following buttons:
1.
2. / for "DHW"
3. OK to confirm
4. / for "SETPOINT"
5. OK to confirm
6. / for the required DHW temperature
7. OK to confirm
Time program for DHW heating
Setting a time program
Factory settings: 05:30 to 22:00 h
You can change the time program individually in
accordance with your requirements.
Press the following buttons:
1.
2. / for "DHW"
3. OK to confirm
4. / for "DHW SCHED"
5. OK to confirm
To continue: See page 20, but without selecting a tem-
perature level.
DHW heating
Starting DHW heating
6192459
Operation

Related product manuals