9
Control unit of Viessmann appliance
The commissioning and matching of the control unit to
local conditions and building characteristics, as well as
instructing the user in the operation of the system, is
carried out by your contractor.
During commissioning, the control unit settings are
transferred to the remote control.
Remote control
Commissioning of the Vitotrol 100-E: See page
14 15.
Your system has been preset
The control unit preset at the factory.
Operating instructions for the Viessmann appli-
ance
The range of functions and displays on your remote
control depends on the control unit it is connected to,
its settings and the equipment of the system overall.
Your contractor can make further adjustments for you
during commissioning.
You can change the settings at any time to suit your
individual requirements.
Power failure
All settings are saved if there is a power failure.
Energy saving tips
Saving energy when using central heating
■
Do not overheat your home. Every degree of room
temperature reduction saves up to 6 % on your heat-
ing bills.
Do not set your individual preferred temperature too
high, e.g. not above 20 °C: See page 22.
■
Heat your home to the reduced room temperature at
night or during regular absences (not applicable to
underfloor heating). To do this, set the time programs
for central heating.
■
To switch off functions that are not required (e.g.
central heating in summer), select the "Only DHW"
and "Standby mode" operating programs.
Operating instructions for Viessmann heat
generator
Saving energy on DHW heating
■
At night or during regular absences, heat the DHW to
a lower temperature. To do this, set the time program
for DHW heating.
■
Switch on DHW circulation only for those times in
which you regularly use hot water. To do so, adjust
the settings in the time program for the DHW circula-
tion pump. This setting can only be made at the con-
trol unit of the Viessmann appliance.
Operating instructions for Viessmann heat
generator
For additional energy saving functions, e.g. on the con-
trol unit, please contact your contractor.
Introductory information
Commissioning
6192459
Information
To Next Page
Loading...
