Viessmann VITOTROL 100-E - Central Heating; Adjusting the Room Temperature; Time Program for Central Heating

22
You can adjust the room temperatures for 3 tempera-
ture levels:
■
Reduced room temperature "REDUCED" :
Heat your home to the reduced temperature at night
or during regular absences (not applicable to under-
floor heating).
■
Normal room temperature "NORMAL" :
Heat your home to the standard room temperature
during the day.
■
Comfort room temperature "COMFORT" :
Heat your home to the comfort room temperature if
you want to feel particularly cosy.
Note
You define which temperature level is active via the
time program.
Changing the room temperature for the current temperature level
Press the following buttons:
1. / to change the current set temperature.
2. OK to confirm
Changing the room temperature for further temperature levels
Press the following buttons:
1.
2. / for "TEMP PROF"
3. OK to confirm
4. / for "COMFORT", "NORMAL" or
"REDUCED"
5. OK to confirm
6. / to change the current set temperature.
7. OK to confirm
Time program for central heating
Setting a time program
Factory settings: One time phase from 06:00 to
22:00 h for every day of the week
You can change the time program individually in
accordance with your requirements.
Press the following buttons:
1.
2. / for "SCHEDULE"
3. OK to confirm
To continue: See page 20.
Switching central heating on or off
Room heating can only be switched off via the Viess-
mann appliance, e.g. the heat generator. Alternatively,
the set room temperature of the temperature level can
be lowered via the Vitotrol 100-E so that the heating is
switched off.
For information on the operating programs, see
page 18.
Note
If the actual room temperature exceeds the current set
room temperature, room heating is automatically
switched off.
Central heating
Adjusting the room temperature
6192459
Operation