Viessmann VITOTRONIC 200 - Page 36

36
3. If applicable, use / to select the required heating/
cooling circuit
4. "Operating program"
5. "Standby mode" (frost protection)
You do not want to heat DHW, but do want to provide central heating:
1. Extended menu:
2. "Heating" or "Heating/cooling"
3. If applicable, use / to select the required heating/
cooling circuit
4. "Operating program"
5. Depending on the selected heating/cooling circuit:
E.g. "Heating and DHW"
6. until the menu appears
7. "DHW"
8. "Set DHW temperature"
9. Set 10 °C.
DHW heating
Stopping DHW heating (cont.)
5790940