Viessmann VITOTRONIC 200 - Setting the Display Brightness

48
1. Extended menu:
2. "Settings"
3. "Contrast"
4. Set the required contrast.
Setting the display brightness
You would like to be able to read the text in the menu
better. Change the brightness level of the "Control"
display.
You can also alter the "Screen saver" brightness.
1. Extended menu:
2. "Settings"
3. "Brightness"
4. "Control" or "Screen saver"
5. Set the required brightness.
Setting names for heating/cooling circuits
You can designate all heating/cooling circuits individu-
ally. The abbreviations "HC1", "HC2", "HC3" and
"SKK" are retained.
1. Extended menu:
2. "Settings"
3. "Name for heating circuit"
4. "Heating circuit 1", "Heating circuit 2", "Heat-
ing circuit 3" or "Cooling circuit SKK"
5. "Change?"
6. You can select the required character with / .
7. / takes you to the next character.
8. Press OK to accept all entered characters at once
and simultaneously exit this menu.
Note
You can delete the name entered with "Reset?".
Example:
Name for "Heating circuit 2": Apartment
Heating circuit 2 HC2
Change with
(
Heating circuit 1
f
g
d
c
e
Fig. 31
Heating circuit 2
Adopted
Apartment
HC2
Fig. 32
Further adjustments
Setting the display contrast
5790940