56
In manual mode, central heating and DHW heating
operate independently of the time programs:
■
Uncontrolled heating with a set flow temperature of
45 °C
■
DHW heating with "Set DHW temperature 2": see
page 33.
■
No central cooling
■
The heating water buffer cylinder will be heated to
the "Fixd value" temperature.
■
Ventilation operates in the "Standard" operating sta-
tus.
Note
Use manual mode only after consulting your contrac-
tor.
1. Extended menu:
2. "Manual mode".
Manual mode
Terminate with OK
Fig. 44
Note
Key returns you to the extended menu. You can
call up any information and adjust all settings. These
settings become active after manual mode ends.
Manual mode
Manual mode
5790940
To Next Page
Loading...
