14
Further information can be found
in chapter "Terminology" in the
Appendix.
A time program can be set with any
operating mode:
■ Operation without room temperature
controller
■ Room temperature-dependent opera-
tion
■ Weather-compensated mode
Time phases
In the time program, a day is divided
into one-hour time phases. It is for you
to decide what happens in these time
phases, e.g. whether your rooms
should be heated to the standard room
temperature.
Operating status
For each time phase, you can choose
between 3 operating statuses. The cur-
rently active operating status is shown
next to the additional display (see
page).
II Standard heating mode
I Reduced heating mode
0 Standby mode
You can set up a time program for the
following functions:
■ Central heating (see page 20)
■ DHW heating (see page 30)
If a time program is set, the symbol
is shown on the display.
Operation
Time program
5837147
To Next Page
Loading...
Need help?
General