ViewSonic CDE6510 User Manual

34
OSD H-position
Adjust the horizontal position of the OSD menu.
Information OSD
Set the period of time the information OSD is
displayed on the upper right corner of the screen.
The information OSD will display when input signal
is changed.
The information OSD will remain on the screen
with {Off} selection. The options are: {1 ~ 60}
seconds.
Logo
Choose to enable or disable the picture of Logo
when turn on your display.
The options are:
• {Off}
• {On} (Default)
• {User}
1. If Logo set to ON, both scalar ViewSonic logo
and android animation ViewSonic logo will
show.
2. If Log set to OFF, neither scalar ViewSonic logo
nor android animation logo will not show.
3. If Logo set to USER, custom logo option in
android is not set, then there will be no boot
logo when power on.
4. If Logo set to USER, custom logo option in
android is set, there will be only custom logo
when power up.
* Logo will NOT rotate with rotation setting/
detection.
Monitor ID
Set the ID number for controlling the display via
the RS232C connection. Each display must have
a unique ID number when multiple sets of this
display are connected. Monitor ID number range is
between 1 to 255.
The option are: {Monitor group}
Factory reset
CANCEL Reset
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
OSD turn off
OSD H position
OSD V position
Information OSD
Logo
Monitor ID
Heat status
Monitor information
HDMI Version
Configuration2 reset
45
50
50
10
On
Action
24.21°C 75.57°F
Action
Action
Monitor ID
Monitor ID
Monitor group
1
1
1 2
5 6
3
4
7 8
9 10 11 12
13 14 15 16
Monitor information
Model name
Serial NO.
Operation hours
SW Version
CDE6510
N/A
0
FB01.06
{Monitor group}
The options are: {Off} / {1-254}
• {Off} – {Monitor group} are not suppor ted.
• {1-254} – {Monitor group} are suppor ted.
The default se
tting is 1.
Factory reset
CANCEL Reset
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
OSD turn off
OSD H position
OSD V position
Information OSD
Logo
Monitor ID
Heat status
Monitor information
HDMI Version
Configuration2 reset
45
50
50
10
On
Action
24.21°C 75.57°F
Action
Action
Monitor ID
Monitor ID
Monitor group
1
1
1 2
5 6
3
4
7 8
9 10 11 12
13 14 15 16
Monitor information
Model name
Serial NO.
Operation hours
SW Version
CDE6510
N/A
0
FB01.06
Heat status
This function allows you to check the thermal
status at any time.
Monitor information
Shows information about your display, including
model number, serial number, operating hours and
software version.
Factory reset
CANCEL Reset
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
OSD turn off
OSD H position
OSD V position
Information OSD
Logo
Monitor ID
Heat status
Monitor information
HDMI Version
Configuration2 reset
45
50
50
10
On
Action
24.21°C 75.57°F
Action
Action
Monitor ID
Monitor ID
Monitor group
1
1
1 2
5 6
3
4
7 8
9 10 11 12
13 14 15 16
Monitor information
Model name
Serial NO.
Operation hours
SW Version
CDE6510
N/A
0
FB01.06
HDMI Version
Set the HDMI version to 1.4 or 2.0, this setting is
only valid on HDMI input
Conguration2reset
Reset all settings in Conguration2 menu to the
factory preset values.

ViewSonic CDE6510 Specifications

General

Brand	ViewSonic
Model	CDE6510
Category	Monitor
Language	English