ViewSonic M2 - USB Connection

2222
USB Connecon
USB-C Connecon
Connect one end of a USB Type-C cable to the USB-C port of your device. Then
connect the other end of the cable to the USB-C port of your projector.
NOTE:
• Ensure your USB Type-C device can support video transmission.
• The M2 can also use a USB-C connected power bank to turn on the system.
However, the brightness level will be limited to 50% and 30% when the
Light Source Level is set as Full or Eco
USB Type-A Connecon
Connect one end of a USB Type-A cable to the USB-A port of your device (if
applicable). Then connect the other end of the cable to the USB A port of your
projector.

the projector’s USB-A port. To learn more about managing storage device, e.g. USB
page 59.