ViewSonic PA700S - Page 54

54
 

3D Mode
Enable or disable the 3D funcon.
3D-2D
Select how the 3D content should appear on screen.
 
 Display the 3D signal.

Display the le frame of the 3D
content.

Display the right frame of the 3D
content.
3D Format
Select the 3D content format.
 A Blu-ray 3D source will be detected
automacally, and opons will not be selectable.
 

When a 3D idencaon signal is
detected, the 3D format is selected
automacally.
 Display in Side-by-Side format.
 Display in Top and Boom format.
 Display in Frame Sequenal format.
3D Sync Invert
Enable or disable the 3D Sync Invert funcon.
 This projector is a 3D ready projector with DLP-Link 3D soluon. Please
make sure your 3D glasses are for DLP-Link 3D. This projector supports
frame sequenal (page-ip) 3D via the / ports. For the
best performance, 1920 x 1080 resoluon is recommended. Please note
that 4K (3840 x 2160) resoluon is not supported in 3D mode.