ViewSonic PA700S - OSD Options Menu Settings; Input Source and Keypad Lock Management

57

 

Use this opon to enable / disable input sources.

On
The projector will only search the current input selecon.
O
The projector will search for other signals if the current
input signal is lost.

When “On” is selected, the fans will spin faster. This feature is
useful in high altude areas where the air is thin.

Choose “On” to hide the info message. Choose “O” to show
source message.

When the keypad lock funcon is “On”, the control panel
will be locked however, the projector can be operated by the
remote control. By selecng “O”, you will be able to use the
control panel once more.
 To turn o the keypad lock, press and hold
“Enter” key on top of the projector for 5 seconds.

Select the test paern from grid and white.

Enable/disable remote control operaon.

Display a black, red, blue, green, or white screen when no
input source is available.