ViewSonic PA700S - HDMI CEC Functionality

56
 

When you connect HDMI CEC-compable devices to the
projector with HDMI cables, you can control them on the
same power on or power o status using the HDMI CEC
control feature in the projector’s OSD. This lets one device or
mulple devices in a group power on or power o via HDMI
CEC in a typical conguraon.

• In order for the CEC funcon to work properly,
make sure that the device is correctly
connected to the  input of the projector
via an HDMI cable, and its CEC funcon is
turned on.
• Depending on the connected device, the CEC
funcon may not work.
• The CEC funcon supports the projector
powering o the device and the device
powering on the projector.