6 ViewSonic PF790
Adjusting the Screen Image
Beginning with the Main Menu shown below, you will use the buttons on the
front control panel to display and adjust the OnView
®
controls which display on
the screen. The OnView controls are explained in the x steps at the top of the
next page and are further explained on page 8.
* The monitor automatically degausses each time you turn it on, removing the buildup of magnetic
fields that can affect color purity and convergence. To prevent possible damage, if you turn the mon-
itor off, then immediately on again, wait 20 minutes before doing this again. Do not turn the moni-
tor on and off repeatedly. To manually
degauss the monitor, see the instructions on page 10.
Scroll and
adjustment
buttons
Main Menu
and Save
button [1].
Power
On/Off
Select
button [2]
Power
light
Main Menu
With OnView controls
Front Control Panel
To Next Page
Loading...
