ViewSonic PJ1158 - Settings

Settings
Settings
Refer to the following for conguring or controlling the projector via a web brows-
er.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter
[https://192.168.1.10] into the ad-
dress bar of the web browser and the
screen in Fig. 1 will be displayed.
2) Enter your ID and password and click
[Logon].
If the logon is successful either the Fig.2 or Fig.3 screen will be displayed.
3) Click the desired operation or conguration item on the main menu located on
the left-hand side of the screen (Fig. 2 or Fig. 3).
Fig. 2 (Logon with administrator ID) Fig. 3 (Logon with user ID)
Fig. 1
60ViewSonic PJ1158