ViewSonic PJ1158 - Network Settings

Settings
Network Settings
Displays and congures network settings.
Click the
[Apply] button to save the settings.
• The new conguration settings are activated after restarting the net-
work connection. When the conguration settings are changed, you must re-
start the network connection. You can restart the network connection by clicking
[Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network adminis-
trator before setting server addresses.
NOTE
Item Description
IPConguration
Congures network settings.
DHCP ON Enables DHCP.
DHCP OFF Disables DHCP.
IP Address Congures the IP address when DHCP is disabled.
Subnet Mask Congures the Subnet Mask when DHCP is disabled.
Default Gateway Congures the Default Gateway when DHCP is disabled.
Projector Name Congures the Projector name.
SysLocation Congures the location to be referred to when using SNMP.
SysContact
Congures the contact information to be referred to when us-
ing SNMP.
62ViewSonic PJ1158