ViewSonic PJ1158 - Page 96

Command Control via the Network
Reply Data format
The connection ID (the data is same as the connection ID data on the sending
data format) is attached to the RS-232C commands reply data.
<ACK reply>
Reply
Connection
ID
0x06 1 byte
<NAK reply>
Reply
Connection
ID
0x15 1 byte
<Error reply>
Reply Error code
Connection
ID
0x1C 2 bytes 1 byte
<Data reply>
<Projector busy reply>
<Authentication error reply>
Reply Data
Connection
ID
0x1D 2 bytes 1 byte
Reply Status code
Connection
ID
0x1F 2 bytes 1 byte
Reply
Authentication Er-
ror code
Connection
ID
0x1F 0x04 0x00 1 byte
91ViewSonic PJ1158