ViewSonic PJ503D-1 - Srgb Mode Alignment Procedure

25
ViewSonic Corporation Confidential - Do Not Copy PJ503D-1
2.2 sRGB Mode alignment procedure
Confirm CW delay adjustment OK
Confirm ADC adjustment OK
Input W(128,128,128) by pattern generator
Read Wx, Wy
Choose sRGB Mode in PC source
Set CSC table
Read Wx,Wy until Wx(0.313+/-6,0.329+/-10)
Input W(255,255,255) by pattern generator
Read Wx, wy
Read Wx,Wy until Wx(0.313+/-6,0.329+/-6)
OK
If ‘NO’
If ‘NO’
If ‘Yes’