ViewSonic PJ678 - Image (Computer Mode); Image (Video Mode)

23ViewSonic PJ678
Image (Computer Mode)
Image Size
Use this function to choose your desired image size.
Q 1 TO 1: Keep the image with original width-height ratio and maximize the image
to fi t native horizontal or vertical pixels.
Q FILL ASPECT: Maintain the original aspect ration of the input signal while enlarging
to fi ll as much of the output display as possible. 16:9 input on a 4:3
output will result in back bars on the top and bottom.
Q FILL ALL: The input source will be scaled to fi t the projection screen.
H Position (Horizontal Position)
Q Press the W to move the image left.
Q Press the X to move the image right.
V Position (Vertical Position)
Q Press the W to move the image down.
Q Press the X to move the image up.
Resync
Automatically scans the input source.
Freeze
Q Choose “ON” to freeze the screen image.
Q Choose “OFF” to unfreeze the screen image.
Image (Video Mode)
Image Size
Use this function to choose your desired image size.
Q 1 TO 1: Keep the image with original width-height ratio and maximize the
image to fi t native horizontal or vertical pixels.
Q FILL ALL: The input source will be scaled to fi t the projection screen.
Q ANAMORPHIC: Maintain the original aspect ratio in the center of the output image
nd place the majority of the distortion towards the horizontal edges
of the image.
Freeze
Q Choose “ON” to freeze the screen image.
Q Choose “OFF” to unfreeze the screen image.