ViewSonic PJL6243 - Part Names and Functions; Front; Back; Bottom

8ViewSonic PJL6243
8
Part Names and Functions
⑤ ⑦ ⑧
③②
Front
Back
⑥
① TopcontrolsandIndicators
② ZoomRing
③ Focus Ring
④ Speaker
⑤ Infrared Remote Receiver
⑥ Projection Lens
⑦ Lens Cap
(See page 60 for attaching.)
⑧ Air Intake Vent
⑨ Lamp Cover
⑩ TerminalsandConnectors
⑪ LANConnectionTerminal
⑫ Power Cord Connector

Note:
Replace only with the same types of the supplied
cords or cables. Using improper cords or cables
may cause an electric shock or a fire.
⑬ Exhaust Vents
CAUTION
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
⑭ Filter
⑮ Adjustable Foot

Note:
⑪
LAN Connection Terminal is for the Network
function. Refer to the User Guide of “Network Set-
up and Operation” .
 KensingtonSecuritySlot
This slot is for a Kensington lock used to deter
theft of the projector.
*Kensington is a registered trademark of ACCO
Brands Corporation.
CAUTION
Do not turn on a projector with lens cap attached.
High temperature from light beam may damage
lens cap and result in fire hazard.
⑪
⑨

Bottom
⑮
①
⑬⑬⑫
⑭
④
⑩