ViewSonic PJL6243 - Top Control

10ViewSonic PJL6243
10
Part Names and Functions
TopControl
⑦ LAMP REPLACE indicator
Lights yellow when the projection lamp
reaches its end of life (pp.61, 68).
⑧ WARNING indicator
– Lights red when the projector detects an
abnormal condition.
– Blinks red when the internal temperature of
the projector exceeds the operating range
(pp.58, 68).
④ ON/STAND–BYbutton
Turn the projector on or off (pp.18-20).
⑤ POWER indicator
– Lights red when the projector is in stand-by
mode.
– Lights green during operations.
– Blinks green in the Power management
mode (p.49).
⑥ MENU button
Open or close the On-Screen Menu (p.21).
② POINT▲▼◄►(VOLUME–/+)buttons
– Select an item or adjust the value in the On-
Screen Menu (p.21).
– Pan the image in the Digital zoom +/- mode
(p.35).
– Adjust the volume level (Point ◄►buttons)
(p.24).
③ AUTOSETUPbutton
Execute the setting of Auto setup (includes
Input search, Auto PC adj. and Auto Keystone
functions) in the setting menu. (pp.23, 45).
① SELECTbutton
– Execute the selected item (p.21).
– Expand or compress the image in the Digital
zoom mode (p.35).
①
②
③
④
⑤
⑧
⑥
⑦