ViewSonic Pro8400 Series VS13647 - Disassembly Steps: Ballast Module Removal

Step Figure Description
10
1. Loosen the two screws as
shown.
11
1. Loosen the two screws as
shown.
2. Remove the metal sheet of
Ballast.
Note
Note: 2 wires have been
connected to Ballast.
Disconnect these 2 wires before
remove the metal sheet.
J1635-3185-00
To Lamp
To Power Board
J1635-3623-0A
J1635-D110-0A*2
Confidential - Do Not Copy
ViewSonic Corporation
Pro8400
19