Step Figure Description
12
Release the four pillars by Long
Nose Nipper to remove the
Ballast.
13
1. Remove four screws on the
optical engine.
2. Remove the optical engine
module carefully.
14
1. Loosen all screws of the two
speakers and then remove them
away.
2. Loosen the screws on the
Power Board and then remove
the Power module from Bottom
Cover.
J1635-A491-0A*4
P2535-7300-0A*4
J1635-D420-0A
J1635-2045-00*4
Confidential - Do Not Copy
ViewSonic Corporation
Pro8400
To Next Page
Loading...
