ViewSonic Pro8400 Series VS13647 - Disassembly Steps: Lamp Module and DMD Board

Step Figure Description
15
Loosen the two screws and
remove the lamp module from
optical engine.
Note: Those screws are
included in the Lamp module.
16
1. Loosen the two screws on
the OE Fan.
2. Remove the Fan.
3. Loosen the four screws on
DMD Board.
4. Remove the heat sink and
DMD Board.
17
Loosen one screw to remove
the metal sheet.
J1635-3660-0A *2
P2535-7300-0A *4
P2535-7300-0A
Confidential - Do Not Copy
ViewSonic Corporation
Pro8400
21