ViewSonic PX700HDH - Changing the Password; Disabling the Password Function

20
Changing the Password
1. Press Menu to open the OSD Menu and go to: SYSTEM > Security Sengs >
Change Password.
2. Press Enter, the message, ‘INPUT CURRENT PASSWORD’ will appear.
3. Enter the old password.
 If the password is correct, the message, ‘INPUT NEW PASSWORD’ will
appear.
 If the password is incorrect, a password error message will appear for 5
seconds followed by the message, ‘INPUT CURRENT PASSWORD’. You can try
again or press Exit to cancel.
4. Enter a new password.
5. Confirm the new password by re-entering the new password.
6. To leave the OSD Menu, press Exit.
NOTE:
The digits being input will display as asterisks (*).
Disabling the Password Function
1. Press Menu to open the OSD Menu and go to: SYSTEM > Security Sengs >
Power On Lock.
2. Press
/ to select Off.
3. The message, “Input Password” will appear. Enter the current password.
 If the password is correct, the OSD Menu returns to the Password page with
“O” shown in the row of Power On Lock.
 If the password is incorrect, a password error message will appear for 5
seconds followed by the message, ‘INPUT CURRENT PASSWORD’. You can try
again or press Exit to cancel.
NOTE:
Please keep the old password, as you will need it to reacvate the password
funcon.