ViewSonic TD1711 User Manual

6
Control of the Touch Function
1. Before using the touch function, make sure the USB cable is connected and the
Windows operating system is started.
NOTE:
1. The touch function may need about 5 seconds to resume if the USB cable is re-
plugged or the computer resumes from sleep mode.
2. The touchscreen can only detect up to 1 fingers simultaneously.
3. Cursor does not accurately follow your finger when you touch the screen, please
follow the steps below to recover.
(OS: Windows 7, Windows 8, Windows 8.1 and Windows 10 Calibration)
1. Open Control Panel, open Hardware and Sound, and then open Tablet PC Settings
2. Select Calibration
3. Follow the instructions to recalibrate your screen
Tilt angle adjustment
1. Tilt angle adjustment (-5˚ to 90˚)

ViewSonic TD1711 Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Touch Screen	yes
Webcam	no
OS Compatibility	windows
Screen Size	17 inches
Panel Type	tn
Aspect Ratio	5:4
Resolution	1280 x 1024
Native Resolution	1280 x 1024
Refresh Rate	60hz
Horizontal Viewing Angle	170 degrees
Vertical Viewing Angle	160 degrees
Response Time	5 milliseconds
Brightness	250 candela per square meter
Contrast Ratio	20, 000, 000:1
Synchronization	not applicable
Horizontal Scan Rate	82 kilohertz
HDR	no
Built-In Speakers	yes
Interface Connectors	1 x vga
HDMI Ports	1
USB Ports	2 x usb-a 2.0
DVI	0
Headphones Output	no
Voice Assistant	no
Power Saving Mode	0.3 watts
Power Consumption	12.6 watts
Depth with Stand	14.5 inches
Height with Stand	13.7 inches
Width with Stand	14.5 inches
Depth without Stand	8.2 inches
Height without Stand	12.4 inches
Net Weight without Stand	8.6 pounds