Name: ViewSonic TD1711
Brand: ViewSonic
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the OSD controls

which display on the screen.

Standby Power On/Off

Power light

Blue = ON

Orange = Power Saving

[1]

Displays the Main Menu or exits the control screen and saves

adjustments.

[2]

Displays the control screen for the highlighted control.

Also a shortcut to toggle analog and digital connection.

▲/▼

Scrolls through menu options and adjusts the displayed control.

Brightness/Contrast (▼) / Audio Adjust (▲)

Do the following to adjust the display setting:

1. To display the Main Menu, press button [1].

NOTE: All OSD menus and adjustment screens disappear automatically after

about 15 seconds. This is adjustable through the OSD timeout setting in the

setup menu.

2. To select a control to adjust, press ▲ or ▼ to scroll up or down in the Main

Menu.

3. After the desired control is selected, press button [2].

4. To save the adjustments and exit the menu, press button [1] until OSD

disappear.

The following tips may help you optimize your display:

• Adjust the computer’s graphics card to support a recommended timing mode

(refer to “Specifications” page for recommended setting specific to your LCD

display). To find instructions on “changing the refresh rate”, please refer to the

graphics card’s user guide.

• If necessary, make small adjustments using H. POSITION and V. POSITION

until the screen image is completely visible. (The black border around the edge

of the screen should barely touch the illuminated “active area” of the LCD

display.)

Questions and Answers:

Need help?

Do you have a question about the ViewSonic TD1711 and is the answer not in the manual?

ViewSonic TD1711 Specifications

General