Need help?Do you have a question about the ViewSonic va1616w-8 and is the answer not in the manual?
General| Resolution | 1366 x 768 |
|---|---|
| Panel Type | TN |
| Response Time | 5 ms |
| Viewing Angles | 90° (H) / 65° (V) |
| Connectivity | VGA |
| Aspect Ratio | 16:9 |
| Input Connectors | VGA |
| Screen Size | 15.6 inches |
| Contrast Ratio | 500:1 |
General warnings, product safety notices, and service notes for safe operation and maintenance.
Important notes for service personnel regarding component replacement and wiring.
Guidelines for correctly handling and placing the LCD monitor to prevent damage.
Detailed technical specifications of the LCD display, including dimensions, power, and compatibility.
Explanation of the D-SUB 15-pin connector and signal levels for video input.
Description of the physical buttons on the front panel and their basic functions.
Guide on navigating the On-Screen Display (OSD) menu and performing display adjustments.
Detailed explanations of OSD menu options like Auto Image Adjust, Contrast, Brightness, and Color Adjust.
Explanation of OSD menu items such as Information and Manual Image Adjust.
Explanation of Setup Menu options and a list of hotkeys for quick access to functions.
Overview of the LCD monitor's main components including boards and logic.
Description of the functions of the main board's control logic and components.
Description of the PWPC (Power) board functions, including adapter and inverter.
Introduction to the main IC (TSUM1PFR) and its integrated functions.
Description of other integrated circuits like LD7552BPS and TL494.
A diagram illustrating the monitor's system architecture and component interconnections.
Conditions and precautions to be observed before performing adjustments.
Overview of the primary functions requiring adjustment, such as White Balance and Geometry.
Detailed steps for alignment procedures, including setting color temperature.
Specific steps for adjusting gain parameters for different color temperatures.
Procedures for adjusting image geometry, including auto-alignment.
Information on factory default settings and functional testing procedures.
Procedures for resetting settings, auto-adjusting image, and testing firmware and DDC.
Steps to adjust image quality parameters like Fine Tune, Sharpness, and Boundary.
Tests for screen uniformity, mura, dead pixels, and audio output quality.
Checking secondary display modes and the procedure for powering off the monitor.
List of necessary equipment and setup steps for performing a firmware upgrade.
Detailed procedure for executing the firmware upgrade using the MStar ISP tool.
Instructions for selecting and executing the DDC Key In program.
Procedure for inputting the serial number and writing data during the DDC process.
Steps to verify the DDC program completion and check for 'data compare ok' message.
A visual flowchart to diagnose and resolve common issues with the monitor's operation.
Detailed circuit schematics for the main board of the LCD monitor.
Detailed circuit schematics for the power board of the LCD monitor.
Circuit schematics for the key board of the LCD monitor.
Top and button views of the main board's printed circuit board layout.
Top and button views of the power board's printed circuit board layout.
Top and button views of the key board's printed circuit board layout.
An exploded view of the monitor assembly and a list of spare parts.
Visual guide detailing the procedure for packing the monitor for shipping.
A comprehensive list of recommended spare parts with part numbers and quantities.
To Next Page