ViewSonic VG2740V - Manual Image Adjust Menu

44
Manual Image Adjust Menu
1. Press the 5 key to display the OSD Menu.
2. Press the 1 or 2 key to select Manual Image Adjust. Then press the 3 key to enter
the Manual Image Adjust menu.
1920 X 1080 @ 60Hz
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
Audio/Mic
Auto Image Adjust
Horizontal Size
H./V. Positian
Fine Tune
Sharpness
Aspect Ratio
Overscan
Blue Light Filter
3. Press the 1or 2keytoselectthemenuopon.Thenpressthe3 key to enter its
sub-menu.
4. Press the 1or 2keytoadjust/selecttheseng.Thenpressthe3keytoconrm(if
applicable).
Menu Opon Descripon
Auto Image Adjust Automacallyadjustthescreenimageposion.
Horizontal Size Stretch or shorten the screen on its horizontal axis.
H./V.Posion Adjustthescreenhorizontallyand/orvercally.
Fine Tune Improve distorted image quality from an analog signal.
Sharpness Adjust the sharpness and picture quality of the monitor.
AspectRao Selecttheaspectraoofthemonitor.
Overscan
Enablethisopontoautomacallyenlargetheoriginal
picturehorizontallyandvercallytoanequalaspectrao
thatllsthescreen.
Blue Light Filter
Adjustthelterthatblockshigh-energybluelightfora
more comfortable viewing experience.
NOTE: Someoponsareonlyavailableforanaloginputsignals.