18
USB Connecon
Connect one end of a USB cable to a USB port of the monitor. Then connect the
other end of the cable to a USB port of your computer.
NOTE: The monitor supports three (3) types of USB ports. When making the
connecon(s), observe the following guidelines:
• Four (4) USB Type A ports: Connecon for your Type A peripheral
device(s) (e.g., storage device, keyboard, mouse).
NOTE: To use some peripherals, please ensure your computer is
also connected to the monitor’s USB Type B port.
• One (1) USB Type B port: Connect the USB Type B male cable (square
with 2 cut corners) to this port, and then connect the other end of the
cable to the USB downstream port of your computer.
• One (1) USB Type C port: Make sure your Type C output device and
cable support video signal transmission for video output use.
NOTE: The USB Type C port supports the following charging
specicaons: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/4.9A (LPS).
Type-C
Type-C
NOTE: It is not necessary to connect to all two types of USB ports at the same
me. The user’s personal usage scenario will determine which, if any,
USB ports are used.