43
Menu Opon Descripon
OSD Pivot
Set the OSD Menu orientaon.
• 0°: Sets the OSD Menu without a pivot.
• +90°: Sets the OSD Menu with a +90° pivot.
• -90°: Sets the OSD Menu with a -90° pivot.
Power Indicator
Set the Power Indicator On or O. If the seng is set to On,
the power indicator lights blue when the device is turned
on.
Auto Power O
Enable this opon to allow the monitor to automacally
turn o aer a certain amount of me.
Sleep
Set the amount of idle me before the monitor enters Sleep
mode.
ECO Mode
Choose between various modes, based on power
consumpon.
DisplayPort 1.2 Enable DisplayPort 1.2 support.
DDC/CI
Enable this opon to allow the monitor control via the
graphics card.
Auto Detect Automacally detect the input signal.
All Recall Resets all sengs to their default values.