ViewSonic VSD224 - Page 10

1
viii
Table of Contents
1
viii
No. Components Descriptions
3
Power button Press to power on / lock the smart display.
- Press about 0.5 seconds to power on the power.
- Lock the smart display when the display is on.
- Recall the unlock display when the smart display
is locked.
- When the display is on, press this button and
hold for about 3 seconds to shut down the smart
display (under Android mode).
4
LED indicator - LED in blue when power on.
- LED turns into amber when smart display be
locked.
5
OSD Menu / Exit Press this button to launch the OSD conguration
menu and press again to exit.
6
Arrow Button
(Down / Left)
Use the arrow buttons (Up / Right and Down / Left)
to move through OSD menus. You can highlight a
menu item by pressing the arrow buttons. You can
also use the arrow buttons to adjust the values to
each item of OSD menu.
7
Arrow Button
(Up / Right)
8
Input Signal Switch
OSD Menu Select
Press to switch Input signal (Android/HDMI)
Select function in OSD menu.