To Next PageTo Next PageHow to troubleshoot a ViewSonic Monitor that has no power?
If your ViewSonic Monitor has no power, touch the LED power light for at least 1-2 seconds. If the LED does not light blue when the device is booting up: - Ensure that the power adapter is plugged into a suitable power socket. - Ensure that the DC connector is fully inserted into the correct socket on the rear of the device. - Check the power socket with another device.
What to do if my ViewSonic Monitor is unable to connect to the network because of poor signal?
If your ViewSonic Monitor is unable to connect to the network, it could be due to a poor signal. Try moving to an open space, or, if you're inside a building, move closer to a window.
Why is my ViewSonic Monitor unable to connect to the network?
If your ViewSonic Monitor is unable to connect to the network, you might not be within the network’s service area. Check the service area with your service provider.
How to fix ViewSonic Monitor touch screen that doesn't respond?
If the touch screen on your ViewSonic Monitor isn't responding to hand gestures or rendering them properly, it may be due to dust, particles, or any foreign material on the camera’s or reflector’s surface. To resolve this: 1. Remove any dust or particles from the reflector and camera using compressed air. 2. Gently clean the cameras and reflector surface carefully with a soft antistatic brush to avoid scratches. 3. Clean any remaining dust with a clean, dry dust-free cloth.
What to do if my ViewSonic VSD241 is unable to send or receive e-mail?
If your ViewSonic Monitor can't send or receive e-mails, it might be due to an improperly configured Internet connection or e-mail settings. Check your network connection. Confirm with your e-mail service provider that your e-mail settings are configured correctly.
How to troubleshoot no network on ViewSonic Monitor?
If your ViewSonic Monitor has no network connection, check the WiFi settings and try Ethernet if available.
What should I do if my ViewSonic VSD241 Monitor locks up?
If your ViewSonic Monitor experiences a lock-up, restart it by touching the LED power light.
How do I fix no audio on my ViewSonic VSD241?
If there is no audio from your ViewSonic Monitor, check the volume level setting.
General| Full HD | Yes |
|---|---|
| Display diagonal | 24 \ |
| Tilt angle range | 15 - 70 ° |
| Touch technology | Dual-touch |
| Display brightness | 250 cd/m² |
| Native aspect ratio | 16:9 |
| Processor cores | 4 |
| Processor model | Tegra 3 |
| Processor family | NVIDIA Tegra |
| Processor frequency | 1.7 GHz |
| Processor manufacturer | NVIDIA |
| Product type | All-in-One PC |
| Motherboard chipset | - |
| Internal memory | 1 GB |
| Memory clock speed | - MHz |
| Internal memory type | DDR3-SDRAM |
| Maximum internal memory | - GB |
| Storage media | Flash |
| Optical drive type | No |
| Total storage capacity | 8 GB |
| Compatible memory cards | SD |
| AC adapter output current | 3.4 A |
| Discrete graphics card model | Not available |
| RMS rated power | 4 W |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Bluetooth version | 2.1+EDR |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Operating system installed | Android 4.2 |
| Product color | White |
| Total megapixels | 2 MP |
| AC adapter power | 65 W |
| AC adapter input voltage | 100 - 240 V |
| AC adapter output voltage | 19 V |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 90 % |
| Cables included | USB |
Weight and Dimensions| Package depth | 164 mm |
|---|---|
| Package width | 735 mm |
| Package height | 520 mm |
| Package weight | 8500 g |
| Depth (with stand) | 75 mm |
| Width (with stand) | 610 mm |
| Height (with stand) | 480 mm |
| Weight (with stand) | 7200 g |
