57
6. Make sure the IR extending cable is correctly inserted to ‘IR IN’ jack at the
back of WPG, not ‘AUDIO OUT’ jack.
Scenario: No image displayed on WPG’s display
Solution:
1. Check the connection between video display and WPG.
2. Make sure the video display you’re using supports the video output mode
you selected (in VGA mode).
3. Make sure the video display is switched on.
Scenario: I hear noise when WPG is operating.
Solution: If you smell something strange or even see smoke come out from
WPG, unplug the A/C adapter (if possible), and return the WPG back to dealer
of purchase immediately.
WPG-350ViewSonic
To Next Page
Loading...
