ViewSonic X1-4K Pro - Operation; Turning the Projector On;Off; Starting up the Projector; First Time Activation

24
Operation
Turning the Projector On/Off
Starting Up the Projector
1. Press the Power buon to turn on the projector.
2. The light source will light up, and a “Power On/O Ring Tone” will play.
3. The Power Indicator Light stays green when the projector is On.
4. Turn on all of the connected equipment, i.e. notebook, and the projector will
start to search for an input source.
NOTE:
If the projector detects an input source, the Source Selecon Bar will appear. If
an input source is not detected, the message, ‘No Signal’ will appear.
First Time Activation
If the projector is activated for the first time, set the projector position and the OSD
language. Then, for the SMART SYSTEM, pair the bluetooth remote control, select
the language and country/region, and set up the Google Home app following the
on-screen instructions.