ViewSonic X1-4K Pro - Connect Bluetooth Speaker; Cast; Screen Mirroring

57
Connect Bluetooth Speaker
You can connect Bluetooth devices, like headphones or soundbar, to your
Smart System. You can only connect one audio device at a time.
1. From the Smart System home screen, in the top right, go to the prole picture or
inial and select Sengs.
2. Select Remote & Accessories > Pair remote or accessory.
3. Make sure your device is in pairing mode or is visible to other devices.
4. Idenfy the device you want to pair from the list and select it.
5. On the Bluetooth pairing request screen, select Pair.
Tip:
Accessories that have been paired with your device appear in the
Remote & Accessories of Sengs. You can also rename or forget devices.
NOTE: The Bluetooth funcon is only available when the input source is
Smart System. It is not available for the HDMI/USB C source.
Cast
You can cast content from phones, tablets, or laptops to your projector.
1. Connect your device to the same Wi-Fi network as your projector.
2. Open the app that has the content you want to cast.
3. In the app, nd and select Cast
.
4. On your device, select the name of your projector.
5. When Cast
changes color, you’re successfully connected.
To stop casting, on your device, select Cast
> Disconnect.
NOTE:
You can only cast from the latest version of a Chromecast-enabled app or a
Chrome browser on a device connected to the same Wi-Fi network as your
projector.
NOTE: The Cast funcon is only available when the input source is Smart System. It is
not available for the HDMI/USB C source.
Screen Mirroring
Mirror your personal device’s screen.
For Android:
1. Download and install the “Google Home” applicaon and open it.
2. Pull-to-refresh the app and wait for 30 seconds.
3. “Devices Name” will now be visible, select it.